Description
DJI Ronin-MX 3-axis gimbal stabilizer, iOS 7.1 or above, Android 4.3 or above, New
New in this entry is the DJI Ronin-MX three-axis gimbal, listed with its mobile app requirement of iOS 7.1 or above; Android 4.3 or above, for cameras up to 10 lb. Rental houses and production companies that need one stabilizer for both handheld and Matrice 600 aerial work are the buyers.
The DJI Ronin-MX is a 2016 three-axis handheld and aerial gimbal for cinema and broadcast cameras up to 10 lb. It uses DJI's encoder-equipped drive motors and a 32-bit DSP with an independent IMU to hold angular vibration within 0.02 degrees, runs about 3 hours on a 4S Ronin-M battery, and switches between underslung, upright, briefcase, aerial, and jib modes. The camera tray takes bodies up to 160 mm wide, and two P-Tap outlets, a USB port, and a Lightbridge connection power accessories or allow mounting on the Matrice 600.
Production companies, rental houses, and aerial-service operators buy the Ronin-MX from TG Wireless as a gimbal that works on the ground and in the air.
Key specifications
| Model | DJI Ronin-MX 3-axis gimbal stabilizer, 2016 |
|---|---|
| Payload | Up to 10 lb (4.5 kg) reference load |
| Operation modes | Underslung, upright, briefcase, aerial, jib or wirecam |
| Run time | 3 hours on the 4S Ronin-M battery |
| Rotation | Pan 360 degrees; tilt +45 to -135 degrees controlled; roll plus or minus 25 degrees |
| Control | 2.4 GHz remote controller, Bluetooth 4.0, USB 2.0, D-Bus receiver |
| Accessory power | Two 12 V regulated P-Tap, one USB, one DJI Lightbridge |
| Camera tray | Up to 120 mm depth, 130 mm height, 160 mm width |
| Weight | 6.11 lb (2.77 kg) with handle bar; 4.74 lb (2.15 kg) with vibration absorber |
| Software | PC assistant: Windows XP or above, Mac OS X 10.9 or above; mobile app: iOS 7.1 or above, Android 4.3 or above |
| Operating temperature | 5 to 120 degrees F (-15 to 50 degrees C) |
Condition: New
Brand new units in the original box with the original in-box accessories as listed. Nothing has been activated or reconditioned. If your channel needs sealed retail packaging rather than open-box new, say so when you request a quote so the account manager can confirm how the lot is packed.
Network and compatibility
This is not a cellular device, so SIM lock state and the US 2G and 3G retirements do not apply; see the network status line in the table. The Ronin-MX is tuned and monitored through DJI's assistant software on a PC running Windows XP or later, a Mac on OS X 10.9 or later, or over Bluetooth 4.0 from the mobile app on iOS 7.1 or Android 4.3 and above. Its 2.4 GHz receiver pairs with the Ronin remote controller, and the Lightbridge port allows mounting on the Matrice 600 for aerial work.
Resale fit
- Film and video production companies and camera rental houses.
- Aerial-service operators flying the Matrice 600 who need a shared ground and air gimbal.
- Specialist camera dealers serving cinema and broadcast crews.
Ordering from TG Wireless
TG Wireless sells to the trade. Pricing is shown to approved dealer accounts, and your account manager confirms availability, quantities, and grade mix before invoicing. Orders typically ship within 24 hours of order placement by FedEx, UPS, or DHL, within the United States and internationally. TG Wireless's 12-month warranty applies, with coverage and RMA handling per your order documentation. Resellers with a valid resale certificate are not charged sales tax. The FAQ covers account setup and shipping questions.